Employment Application

Please complete the below form to be considered for employment.

Job Information

Position: Skilled Laborers

Company: ICS, Inc.

Location: Grand Forks, ND


General Purpose: Assist skilled craft workers in performing their assigned duties.

Work Schedule: Days and hours vary depending on the assigned project.

Responsibilities & Duties

  • Promote and comply with all Company and safety policies and procedures

  • Measure distance from grade stakes, drive stakes and stretch tight lines

  • Bolts, nails, aligns and blocks up under forms

  • Signal operators of construction equipment to facilitate alignment, movement and adjustment of machinery to conform to grade specifications

  • Level earth to fine grade specifications, using hand tools

  • Mix concrete using portable mixer

  • Smooth and finish freshly poured cement or concrete using float, trowel or screed

  • Position, join, align and seal pipe sections

  • Erect scaffolding, shoring and bracing

  • Mop, brush or spread paints or bituminous compounds over surfaces for protection

  • Spray materials such as water, sand, steam, vinyl, paint or stucco through hose to clean, coat or seal surfaces

  • Apply caulking compounds by hand or with caulking gun to seal crevices

  • Grind, sand or polish surfaces such as concrete, using abrasive tools or machines

  • Perform tasks involving use of hands and tools, such as demolishing buildings, sawing lumber, dismantling forms, removing forms from concrete, mounting pipe hangers, cutting and attaching insulating material, use of jackhammers, cleanup, etc.

  • Maintain a professional appearance

  • Other duties as assigned by Foreman or Superintendent

    Required Education

  • High school diploma or equivalent GED.

    Required Experience

  • Minimum of three months past experience working as a general laborer.


    Required Skills/Licenses/Certifications

  • Valid driver’s license to operate motor vehicles.

  • Read and interpret documents such as safety rules, operating and maintenance instructions and procedure manuals

  • Add and subtract two digit numbers and multiply and divide with 10’s and 100’s, ability to perform these operations using unit weight measurements and volumes.

  • Apply common sense understanding to carry out instructions furnished in written or oral form

  • Workers should be able to work within precise standards of accuracy and follow set procedures and standards


Supervisory Responsibility

  • None


    Physical Demands & Working Conditions

    The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job.  Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions

  • Able to bend, stoop, squat, crawl, climb, kneel, balance, push, pull, and reach overhead for extended periods of time.

  • Lift and carry at least 50 to 100 pounds.

  • Climb and descend all types of ladders.

  • Wear personal protective equipment (i.e., hardhat, eye protection, respiratory protection, fall protection, etc.)


Required Tools

  • See Tool Requirements


    Travel Requirement

  • May be required to travel to different jobsites on limited notice


Work Environment 

The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job.  Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.

  • Position requires working in all elements – heat, cold, rain, or snow – depending on job location and time of year.

  • May require use of personal vehicle for transportation to and from work site. 

  • Must be able to utilize job site sanitary facilities (i.e., Portable Toilets).

  • May require work in restricted areas (i.e., excavations, utility tunnels, manholes, tanks, crawl spaces, attics, etc.).

  • May require working at various heights, up to 100-feet, from ladders, scaffolds, aerial lifts, catwalks, or other safe work areas.


Required Personal Protective Equipment

Employees must use hard hats, eye protection (ANSI Z87), hearing protection (where required), safety-toe protective footwear (ANSI Z41) and gloves as required by industry/construction safety standards or as deemed necessary by Company safety policy and procedure.

Required Fields *

Contact Info

If other, please specify:

Eligibility and Availability
Are you at least 18 years of age?: *  
Are you eligible to work in the United States/UK/Canada (as it may apply)?: *  

Full or part time?:  
Are you willing to relocate?:  

Please select your preference below: *  

Work History


Did you graduate?:  

Did you graduate?:  

Did you graduate?:  

Referred By


Cover Letter


If other, please specify:


I certify that answers given herein are true and complete.

I authorize investigation of all statements in this application for employment as may be necessary in arriving at any employment decision. I understand that this application is not and is not intended to be a contract of employment. If employed, I may terminate employment at any time for any reason, and the Company may terminate my employment at any time for any reason.

If employment is obtained and it is discovered that false or misleading information has been given in my application or interview(s), I understand that this may result in discharge.

Acceptance: *

When finished, click Submit Application button below.




Back to Top